In this spread sheet has all the required steps to do complete inspection.

First, all the items to be checked by the contractor’s Engineer and if all the items are OK to proceed, sign and foreword to the consultant’s Engineer

Then he will check again all the items and comment for corrections. If all are accepted contractor can start concreting.

If there is any recommendation, the contractor can correct and invite the consultant by the same document for the second inspection.

This format covers the following items and if you need to add more items, edit the spreadsheet.

ScreenShot_20200424092711
Overall

1. Location
2. Grid Line
3. Dimension
4. Storage Height
5. Surface Preparation  (Chipping)
Formwork

1. Condition
2. position
3. Fixity / Bracing
4. Level
5. Vertically/ Allignment
6. Storey Height/ Level
7. Cleanliness
8. Gaps
9. Opeaning / Drops

Rebar Work

1. Position
2. No & Size
3. Anchorage
4. Lapping
5. Cover
6. Cleanliness
7. Spacing
8. Dowel / Star Bar
9. Links

Download the Complete Spread sheet

Edit the Logo and Address of your company as your requirement.


3 Comments

ปั้มไลค์ · June 25, 2020 at 10:21 am

Like!! I blog quite often and I genuinely thank you for your information. The article has truly peaked my interest.

Construction Inspection Checklist Forms - All about Engineering · April 24, 2020 at 3:27 am

[…] Approval Sheet For Structural Work […]

Approval Sheet for Mechanical and Plumbing Works - All about Engineering · April 24, 2020 at 4:08 am

[…] All the checks to be done according to the previous method – (Approval for structural work) […]

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *